No products in the cart.
GDI High Flow Pump HPFP35 For Mustang 2.3L EcoBoost
$ 1,399.00
1 in stock
APPLICATION
Maximum Rail Pressure
200bar / 2900psi (XDI-HPFP35)
250bar / 3625psi (XDI-HPFP60)Fuel Compatibility: all known fuels, all Ethanol blendsElectric Connector: Bosch Compact 2-pin
Driver Profile: XDI, tuning changes needed
Accessories: electric pigtail
200bar / 2900psi (XDI-HPFP35)
250bar / 3625psi (XDI-HPFP60)Fuel Compatibility: all known fuels, all Ethanol blendsElectric Connector: Bosch Compact 2-pin
Driver Profile: XDI, tuning changes needed
Accessories: electric pigtail
MECHANICAL DATA
Geometric Volume
1.52cc / rev
(+36% capacity over OEM 1.12cc/rev)Maximum Flow Rate:
240LPH @ 7000rpm (actual measured flow)Combinations and Power Potential:
On a 2.3 Mustang with stock turbo, just an XDI-HPFP35 is needed to run full E85. No LPFP, no bigger injectors, no port injection.
Up to 450lbft possible but not recommended with stock motor. 383whp (auto) / 400whp (manual), turbo limited.
With bigger turbo and E85 you need the XDI-HPFP35 and our XDI+55% DI-Injectors for >420whp, up to 500-550whp.
Above 500-550whp on E85 you need the XDI-HPFP60 and our XDI+55% DI-Injectors.
These numbers are not guaranteed, they are highly based on environment and dyno type and calibration.Housing material: stainless steel, hard coated AluminumTuning Support: Standalone, SCT, COBBDry Weight: 1112 g
1.52cc / rev
(+36% capacity over OEM 1.12cc/rev)Maximum Flow Rate:
240LPH @ 7000rpm (actual measured flow)Combinations and Power Potential:
On a 2.3 Mustang with stock turbo, just an XDI-HPFP35 is needed to run full E85. No LPFP, no bigger injectors, no port injection.
Up to 450lbft possible but not recommended with stock motor. 383whp (auto) / 400whp (manual), turbo limited.
With bigger turbo and E85 you need the XDI-HPFP35 and our XDI+55% DI-Injectors for >420whp, up to 500-550whp.
Above 500-550whp on E85 you need the XDI-HPFP60 and our XDI+55% DI-Injectors.
These numbers are not guaranteed, they are highly based on environment and dyno type and calibration.Housing material: stainless steel, hard coated AluminumTuning Support: Standalone, SCT, COBBDry Weight: 1112 g
| Weight | 2 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 cm |
Be the first to review “GDI High Flow Pump HPFP35 For Mustang 2.3L EcoBoost”
Related products
$ 1,599.00 – $ 2,499.00
$ 1,599.00 – $ 2,499.00
$ 2,799.00 – $ 3,299.00
$ 419.00 – $ 727.00
$ 1,733.00
$ 2,799.00 – $ 3,299.00
$ 1,699.00
$ 6,427.00 – $ 6,627.00
$ 1,599.00 – $ 2,499.00
$ 1,199.00
$ 1,199.00
$ 4,800.00 – $ 5,000.00
$ 1,249.00 – $ 1,799.00
$ 1,399.00 – $ 3,999.00
$ 6,999.00 – $ 7,199.00
$ 1,599.00
Reviews
There are no reviews yet.