An air-to-water charge-air cooling system moves intake heat into a coolant loop, and the heat exchanger is where that heat finally leaves the car. Size it too small and the loop has nowhere to dump the load. Coolant temperature climbs, the charge-air cooler stops pulling heat out of the intake tract, and intake temperatures rise with it. The Mishimoto Universal Air-to-Water Heat Exchanger gives that loop the capacity to keep up. Its 24.0in x 7.6in x 1.9in core supports charge-air cooling systems on builds making up to 750 horsepower.—-The 24.0in x 7.6in face puts 182 square inches of heat-rejection surface in the airstream, while a dual-pass core routes coolant across it twice. That layout lets a 1.9-in thick exchanger do the cooling work of a deeper unit, which matters when the only clearance left in the chassis is shallow. Bead-rolled 7/8-in inlet and outlet ports lock standard coolant hose in place for a leak-free connection. An integrated bleeder purges air pockets during the fill, so the loop cools at full capacity from the first drive. Aluminum core and end tank construction handles the pressure and heat cycling that fatigues plastic tanks. Universal mounting bosses on each end tank provide load-bearing attachment points on both ends.—-Universal fitment. Mounting hardware locations and 7/8-in hose connections suit custom, swap, and forced-induction builds up to 750 hp. Backed by the Mishimoto Lifetime Warranty.
| Weight | 5 lbs |
|---|---|
| Dimensions | 34.8 × 10.2 × 3.9 cm |















Reviews
There are no reviews yet.